NEMA及IEC標準下的電機銘牌識別（連載一）

電機標準可分為兩大類：NEMA 和 IEC（及其衍生標準）。在北美，美國國家電氣制造商協會 (NEMA) 負責制定電機標準，包括銘牌上的標注內容（NEMA 標準 MG 1-10.40）。在世界其他大部分地區，國際電工委員會 (IEC) 負責制定電機標準，或者至少許多國家的標準與 IEC 標準非常接近。例如，德國的 VDE 0530 標準和英國的 BS 2613 標準與 IEC 標準非常接近，只有少數例外。

The motor standards can be grouped into two major categories: NEMA and IEC (and its derivatives). In North America, the National Electric Manufacturers Association (NEMA) sets motor standards, including what should go on the nameplate (NEMA Standard MG 1-10.40). In most of the rest of the world, the International Electrotechnical Commission (IEC) sets the standards or at least many countries base their standards very closely on the IEC standards For example, Germany's VDE 0530 standard and Great Britain's BS 2613 Standard are close to IEC with minor exceptions.

美國國家電氣制造商協會 (NEMA) 規定，每塊電機銘牌上都必須標明以下具體信息：

1) 制造商類型

2) 額定電壓和滿載電流

3) 額定頻率和相數

4) 額定滿載轉速

5) 額定溫升或絕緣系統等級

6) 時間評級

7) 額定馬力

8) 堵轉指示代碼字母

9) 使用系數

10) 效率

11) 框架尺寸

12) 設計規范

The National Electrical Manufacturer's Association (NEMA) specifies that every motor nameplate must show these specific items:

1) Manufacturer's type

2) Rated volts and full load amps

3) Rated frequency & number of phases

4) Rated full load speed

5) Rated temperature rise or the insulation system class

6) Time rating

7) Rated horsepower

8) Locked rotor indicating code letter

9) Service Factor

10) Efficiency

11) Frame Size

12) Design Code

電機銘牌信息

MOTOR NAMEPLATE INFORMATION

行業標準

Industry Standards

當今許多電機標準都是由一些組織制定的，例如美國國家電氣制造商協會 (NEMA)，該協會主要負責北美電機的標準化工作。這些標準代表了行業慣例，并得到了電機制造商的支持。這些標準可在 NEMA 標準出版物 No. MG-1 中找到。

電氣和電子工程師協會 (IEEE) 是另一個為電機行業制定電氣標準和推薦規范的機構。此外，國際標準也存在，例如國際電工委員會 (IEC)、加拿大標準協會 (CSA)、日本標準 (JEC)、英國標準 (BS) 等組織，以及每個國家/地區至少有一個組織制定了國際標準。

IEC 是負責歐洲共同體電機標準的組織。這些標準與 NEMA 標準不同，可在 IEC 34-1-16 中找到。這些電機被稱為 IEC 電機。

美國保險商實驗室 (UL) 是一家獨立的測試機構，負責制定電機和其他電氣設備的標準。國家消防協會 (NEMA) 是國家電氣規范 (NEC) 的發起機構，其標準被保險檢查員和許多政府機構用于監管建筑規范。需要注意的是，NEMA 和 IEC 都不是測試機構；它們是制定行業標準的組織。

Many of today’s motor standards have been established through organizations such as the National Electrical Manufacturers’ Association (NEMA), which is primarily associated with motors used in North America. The standards developed represent general industry practices and are supported by the motor manufacturers. These standards can be found in NEMA Standard Publication No# MG-1.

Institute of Electrical and Electronic Engineers, IEEE, is another agency that has established electrical standards and recommended practices for the motor industry. International standards exist as well, with organizations such as the International Electrotechnical Commission (IEC), the Canadian Standards Association (CSA), the Japanese Standards (JEC), the British Standards (BS) and at least one organization for each country that exists.

IEC is the organization responsible for motor standards in the European community. These standards differ from NEMA standards and can be found in IEC 34-1-16. These motors are referred to as IEC motors.

Underwriters’ Laboratories (UL) is an independent testing organization that sets standards for motors and other electrical equipment. The National Fire Protection Association, which sponsors the National Electrical Code (NEC), is used by insurance inspectors and many government bodies regulating building codes. Note that neither NEMA nor IEC are testing agencies; they are organizations that establish industry standards.

銘牌信息

NAMEPLATE DATA

確保電機可互換的關鍵在于確保不同制造商的銘牌信息通用。電機銘牌上的通用語言使安裝和維護人員能夠在新安裝或更換過程中快速理解和準確識別他們所處理的電機類型。根據美國國家電氣規范 (NEC) 的基本要求，電機銘牌必須顯示以下信息：

? 額定電壓

? 各電壓等級的額定滿載電流

? 頻率

? 相位

? 額定滿載轉速

? 絕緣等級和額定環境溫度

? 額定馬力

? 時間額定值

? 堵轉代碼字母

? 制造商名稱和地址

大多數銘牌上通常還會顯示其他信息。這些信息可能包括電機的使用系數、機殼類型、機座號、接線圖以及獨特或特殊的功能。要基本理解標準化的含義并掌握標準感應電機的一些基本知識，最好的方法是仔細研究典型電機上的銘牌信息。

A critical part of making motors interchangeable is ensuring that nameplate information is common among manufacturers. The common language of the motor nameplate enables installation and maintenance personnel to quickly understand and recognize exactly what type of motor they're dealing with during a new installation or replacement procedure. As a basic requirement of the National Electrical Code (NEC), the motor nameplate must show the following information:

? Rated voltage or voltages

? Rated full-load amps for each voltage level

? Frequency

? Phase

? Rated full-load speed

? Insulation class and rated ambient temperature

? Rated horsepower

? Time rating

? Locked-rotor code letter

? Manufacturer's name and address

Additional information will normally appear on most nameplates as well. This information might include the motor service factor, enclosure type, the frame size, connection diagrams and unique or special features. The best way to approach a basic understanding of what standardization means and to cover some of the material fundamental to standard induction motors is to examine in detail the nameplate information contained on a typical motor.