SOMMER噴頭ZWERG產品參數
Technical data: | |
Material: | Nickel-plated brass |
Operating pressure: | 3 - 8 bar (The higher the pressure, the finer the spray mist and the smaller the spray angle.) |
Operating temperature: | -25 °C.+80 °C |
Viscosity angle: | 1 - 200 mm2/sec. at 20 °C |
Max. fluid flow: | 36 ml/min. |
Max. cycle frequency: | 60/min. |
Spray angle: | max. 30° |
Max. air consumption: | 18 l norm./min. |
Noise level: | 73 dB |
SOMMER噴頭ZWERG技術參數
功能：
將流體軟管放入無壓儲罐中。
霧化器應始終固定在儲罐中的最高液位之上。施加壓縮空氣后，霧化器將立即開始噴涂（軟管中的內置止回閥[安裝的垂直位置]防止液位下降太快）。霧化器可以通過控制單元（例如，吹氣單元BA …，2/2換向閥）永久性地或在循環基礎上致動，但始終以計量良好的方式致動。流體被適當且經濟地輸送到氣流的中心。借助空氣和流體節流閥可以精確調節空氣和流體的量。
The fluid hose is laid into a pressure-free tank.
The atomizer should always be fixed a little above the maximum fluid level in the tank. With compressed air applied, the atomizer will instantly start to spray (a built-in check valve [vertical position of installation] in the hose prevents the fluid level from dropping too fast). The atomizer can be actuated either permanently or on a cycle base by a control unit (e.g. Blow Unit BA …, 2/2 way valve) – but always in well-metered quantities. The fluid is properly and economically fed into the centre of the air stream. With the air and fluid choke the amount of air and fluid is precisely adjustable.
外觀尺寸
SOMMER噴頭其他常見型號：
SOMMER ZQ-KOPF
SOMMER ZN
SOMMER ZMIN
SOMMER ZR-KOFF
SOMMER ZF
SOMMER ZBX
SOMMER ZF
SOMMER MINI ATOMIZER NEW + ORIGINAL+ ONE YEAR WARRANTY
愛澤工業成立于2010年，定位于向先進制造工業提供高端制造技術和設備。代理經營世界先進的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的優質渠道。
如果有任何關于SOMMER噴頭ZWERG的疑問，請隨時與我們溝通（021-31006702）。我們將盡全力解決您的問題。
If you have any question for SOMMER products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website:www.dljtgw.com.
SOMMER噴頭ZWERG產品參數
