PCH振動監測儀1072規格描述
TECHNICAL DATA: | |
Sensor Type IEPE/CCLD: | |
Sensitivity | 10/100/500/1000mV/g |
Zoomed Dynamic range | ±1.8 Vp |
Full Dynamic range | ±5.4 Vp |
Transducer Bias Current | 5 mA |
Measuring Parameter: | Velocity (mm/s), Acceleration (m/s2 ) or Displacement (μm/mm) |
Measuring Ranges (Selectable): | 0 to 10-20-50-100 mm/s + a large selection of other ranges in m/s2 , g or μm/mm. |
Typical Frequency Range: | 10 Hz - 1000 Hz, -1 dB, 24 dB/oct. Optional: 1 - 300 and many others, please ask |
Detector: | True RMS Detector or 0-Peak |
DC Output: | 4 - 20 mA, relative to 0-100 % of max. measuring range. Load: max. 400 W |
Alarm Detector: | Alert Alarm, adjustable alarm limit Danger Alarm, adjustable alarm limit |
Alarm Relays: | Alert relay, Break |
The Failure Relay will trip automatically on cable short, cable break and system failure. | |
Alert with Latch or Auto Reset (selectable) Danger with Latch or Auto Reset (selectable) | |
Max Voltage:………….…………..…….….30 V | |
Delay Time: | Alert relay 10 sec. (adjustable) |
Other Delay Times can be ordered separately. Hang time for both Alert and Danger: 1 sec. | |
Manual Reset Function: | Available for both Alert and Danger relay |
Test Function: | Can be activated remotely. The relays are activated after the duration of the Delay time and the DC increases to the specified test level 1-102% |
Power Supply: | +24 V DC, ±7%, max. power consumption 2.6 W |
Operating temperature: | - 20° C to + 50° C |
Housing: | DIN rail enclosure IP20 |
Dimensions (LxWxH): | For DIN: 163 mm x 127 mm x 66 mm |
Compliance: | CE mark indicates compliance with EMC directive and Low Voltage Directive Rated according to EN61508-6, SIL-2 |
PCH振動監測儀產品介紹
The PCH 1072 is the new generation of high quality, low cost vibration monitors, which you can use in various rotating machine applications. It has 1 input channel and 2 relays, providing SIL 2 rated machine protection, and measures either acceleration, velocity or displacement.
It is easy and flexible to set up the PCH 1072 with individual frequency ranges, alarm levels and delay times etc. with the complementary Windows-based user software.
It is compatible with PCH Cloud, our Industry 4.0 condition monitoring solution.
PCH 1072 Vibration Monitor
1-channel vibration monitor (0.7 Hz to 1k Hz)
The standard version is a 1-channel monitor with a frequency range from 0.7 Hz to 1k Hz.
You can select among a range of filters. It is also up to you whether the PCH 1072 Mk2 vibration monitor should measure acceleration, velocity or displacement.
2 adjustable alarm relays
The vibration monitor’s two adjustable alarms ensure that the machine vibrations do not exceed the acceptable or allowed limit.
The vibration level is continuously compared to the two alarm limits. If the alarm limits are exceeded, the two alarm relays, Alert/Danger, will be triggered and inform the operator via a connected rotor light, beeper, controller or by directly shutting down the machine.
Main features
1 vibration input channel (accelerometer, proximity probes or velocity probes)
2 relays and a 4-20 mA output.
Redundant Safety Relay (SIL 2)
Configurable alarm levels and delay times
Offline FFT analysis
Buffered output (optional)
Modbus RTU (optional)
Ready for IoT
PCH 1072是新一代高質量，低成本的振動監測器，可在各種旋轉機械應用中使用。它具有1個輸入通道和2個繼電器，提供SIL 2等級的機器保護，并測量加速度，速度或位移。
通過基于Windows的補充用戶軟件，可以輕松靈活地設置具有單獨頻率范圍，警報級別和延遲時間等的PCH 1072。
PCH 1072振動監測儀
1通道振動監測器（0.7 Hz至1k Hz）
標準版本是1通道監視器，頻率范圍為0.7 Hz至1k Hz。
可以在一系列過濾器中選擇。PCH 1072 Mk2振動監視器是否應測量加速度，速度或位移也取決于您。
2個可調警報繼電器
振動監測器的兩個可調警報確保機器振動不超過可接受或允許的極限。
持續將振動水平與兩個警報限值進行比較。如果超出警報極限，則將觸發兩個警報繼電器警報/危險，并通過連接的轉子燈，蜂鳴器，控制器或直接關閉機器來通知操作員。
主要特點
1個振動輸入通道（加速度計，接近探頭或速度探頭）
2個繼電器和4-20 mA輸出。
冗余安全繼電器（SIL 2）
可配置的警報級別和延遲時間
離線FFT分析
緩沖輸出（可選）
Modbus RTU（可選）
為物聯網做好準備
PCH振動監測儀HT系列其他型號：
PCH 1072
PCH 1073
PCH 1420
PCH Transmitter NEW + ORIGINAL+ ONE YEAR WARRANTY
愛澤工業成立于2010年，定位于向先進制造工業提供高端制造技術和設備。代理經營世界先進的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的優質渠道。
如果有任何關于PCH振動監測儀1072/8308的疑問，請隨時與我們溝通（021-31006702）。我們將盡全力解決您的問題。
If you have any question for PCH products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website: www.dljtgw.com.
PCH振動監測儀1072/8308 產品參數
