HASS比例閥EPV-500SS技術規格
Specifications | |
Type: | Single-board microcontroller with 10 bit AD converter |
Control: | Open-loop |
Inputs: | 4-20 mA current or 1 - 5 VDC voltage for position. Switch selectable. |
Input Impedence: | 4-20mA selected: 250 Ohm |
Outputs: | None |
Modes: | Full range, direct acting only |
Adjustment: | None |
Temperature: | 32 ℉to 120℉(0℃ to 49℃ ) |
Humidity: | 10 to 80% non-condensing |
Enclosure: | Stainless steel, general purpose |
Power supply: | 12-24 VDC, 1.5A (1043 Power Supply recommended) |
Power: | consumption 23 Watts maximum, 1 Watt typical |
ACTUATOR | |
Type: | DC step motor, 200 steps/revolution, 4 revolutions for full stroke |
Resolution: | 800:1 (0.125%) |
Speed: | 45 RPM - 5 seconds full stroke |
Torque: | 57.5 oz-in peak |
VALVE | |
Type: | Globe, In-line |
Port Size: | 1/2 inch |
Cv: | 3.5 |
Flow characteristics: | linear |
Valve body material: | Type 316 stainless steel |
Valve trim material: | Type 316 stainless steel |
Seat seal material: | 25 % glass filled TFE |
O-ring material: | ethylene propylene (standard - other materials available) |
Pipe size: | 3/4 NPT |
Connection: | Female pipe thread |
Static Pressure: | 300 psi |
Differential Pressure: | 0 - 120 psi |
Temperature: | 32 - 250 Degrees F (0 - 121 C) |
Bonnet Seal: | Encapsulated EPR O-ring |
(Neoprene, silicone and other O-ring materials also available) | |
Stem Motion: | Rotational |
COMPLETE UNIT | |
Dimensions: | 8.5 x 3.5 x 2.5 H x W x D (inches) |
HASS比例閥EPV-500SS產品介紹
Description
The EPV-500SS Electronic Proportional Valve is a low-cost, computer-controlled proportional valve which directly accepts a 4-20 mA or 1-5V DC control signal. The EPV performs better, costs less to install and less to operate than competitive valves. It is ideal for accurate control of liquid and gas flow.
The EPV has no backlash and no hysteresis. This greatly simplifies control programs. The valve is opened and closed by a zero-backlash screw mechanism. A step motor is directly connected to the valve without gears. The valve can also be operated manually.
An adaptive digital noise filter eliminates dithering of the valve due to noisy control signals. This digital filter can be disabled via a switch on the circuit board.
The valve design features a long-life rotary stem seal. Rotary seals are more durable and require less maintenance than reciprocating stem seals used in pneumatic valves. This seal does not cause the unwanted stick-slip action of pneumatic valves.
The compact size of the EPV makes it easier to handle, and allows it to be installed in smaller spaces. The EPV is about one-third the size of a pneumatic valve.
An EPV installation costs less than a comparable pneumatic control valve system. There is no need for compressed air, filters, regulators, I-P converters, or pneumatic air lines. Simply connect the EPV to the control signal and the power supply.
The EPV is backed by a five (5) year warranty. The reliable, low-maintenance design and heavy-duty construction reduce costly downtime.
The EPV-500SS is made from Type 316 stainless steel. It has 3/4 inch pipe fittings with a 1/2 port size and a Cv of 3.5.
描述
EPV-500SS 電子比例閥是一種低成本的計算機控制比例閥，可直接接受 4-20 mA 或 1-5V DC 控制信號。與競爭閥門相比，EPV 性能更好，安裝成本更低，運行成本更低。它是精確控制液體和氣體流量的理想選擇。
EPV 沒有反沖和滯后。這大大簡化了控制程序。閥門通過零背隙螺桿機構打開和關閉。步進電機直接連接到閥門，無需齒輪。閥門也可以手動操作。
自適應數字噪聲濾波器消除了由于噪聲控制信號引起的閥門抖動。該數字濾波器可以通過電路板上的開關禁用。
閥門設計具有長壽命的旋轉閥桿密封。與氣動閥中使用的往復式閥桿密封件相比，旋轉密封件更耐用且需要更少的維護。這種密封不會導致氣動閥產生不必要的粘滑動作。
EPV 的緊湊尺寸使其更易于操作，并且可以安裝在更小的空間內。 EPV 的尺寸約為氣動閥的三分之一。
EPV 安裝成本低于類似的氣動控制閥系統。無需壓縮空氣、過濾器、調節器、I-P 轉換器或氣動空氣管路。只需將 EPV 連接到控制信號和電源。
EPV 享有五 (5) 年保修?？煽?、低維護的設計和重型結構減少了代價高昂的停機時間。
EPV-500SS 由 316 型不銹鋼制成。它具有 3/4 英寸管件，端口尺寸為 1/2，Cv 為 3.5。
HASS比例閥EPV系列其他常用型號：
HASS EPV-250B
HASS EPV-250SS
HASS EPV-312B
HASS EPV-312SS
HASS EPV-375B
HASS EPV-375SS
HASS EPV-500SS
HASS EPV-500SS
HASS EPV-750SS
HASS EPV-SS-1RM4
HASS EPV-SS-1RS4
HASS EPV-SS-4MG
HASS EPV-SS-4MG2
HASS EPV-SS-6L
HASS EPV-SS-6MG-MM-EP
HASS valve NEW + ORIGINAL+ ONE YEAR WARRANTY
愛澤工業成立于2010年，定位于向先進制造工業提供高端制造技術和設備。代理經營世界先進的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的優質渠道。
如果有任何關于HASS比例閥EPV-500SS的疑問，請隨時與我們溝通（021-31006702）。我們將盡全力解決您的問題。
If you have any question for HASS products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website: www.dljtgw.com.
HASS比例閥EPV-500SS技術參數及介紹
